How to Paint an Xbox 360 Case

The particular Xbox 360 is a great system to own. You can do so many things with a single system. The only problem is that they only come in limited colorations. Well if you’re feeling a little creative and have some basic painting like a professional skills you can give painting your console a go.

I ought to mention that removing the case as you will be doing this few steps will void your warranty so know. Now that we’re through with that let’s get to what that’s needed for the guide.

Materials You Need

  • Paint (auto paint can be best)
  • Primer
  • Painters Tape
  • Clear Acrylic
  • Sand Cardstock (grains from 200-1500)
  • Small Phillips Screwdriver
  • T10 Torx Screwdriver
  • Step 1: Disassemble The Case

The first thing you’ll have to do will be to take apart your console’s case. Make sure all the wires will be disconnected and remove your hard drive. Remove the faceplate simply by pulling on the top and bottom near the edge of the games console until it pops off and then do the same for the many other side. Now take off the top and bottom mesh cell – use a small pointy object to press during the tabs to release the catches. Next you’ll have to insert your knife into the tabs in the back of the case and press all the way down until you hear it pop. Be careful not to break the tabs by simply prying too hard. When you get all the tabs you should be qualified to pop the top off now.

Step 2: Sanding

When sanding your Xbox 360 case you want to start off with a 200 grit sand paper until you get the majority of the paint down. Switch to a 400 or 600 grit sand document now and work it down until it’s nice even. There should be no more imperfections on the case. Now that you will absolutely done sanding you have to wash off all the pieces by using just water.

Step 3: Priming and Painting

First start off of with one coat of primer and let it stay an hour. When it’s dry use some 1500+ grit sand report and do some lite wet sanding. Let it dry once more plus repeat those steps again. When it gets thoroughly waterless, put on the first coat of paint. Follow the wet layering method two more times. You should have three coats of paint.

The day of drying, you can apply the clear furane. Repeat the above steps with three coats but may sand on the last coat. Take this step very severely and take your time or you will have to repeat the whole process!

Provide a case a few days to dry and you should have your brand new attractive Xbox 360 console ready to show the world.

Do you need to get a gift for someone you are aware of who is into gadgets? Protective skins make great items for gadgets for birthdays, holidays or any occasion. There are plenty of options available to you whether they have a Wii, PS3, XBox 360, ipod, Dsi or even one of those new smart phones or laptop. Even though gadgets themselves make great gifts, they are expensive. But if your cash flow is too tight to get them a nice new Nintendo DS, iPhone or Zune player for them then no longer fret it. Simply get some cool accessories for the machines that they already own. Protective Nintendo switch skin make great products for gadgets and only cost about as much as meal your favorite fast food joint.

Protective skins are ideal for someone by using a Dsi, Wii, PS3, PSP, XBox 360, mp3 player, laptop or simply a smart phone would be to get them something to protect their touch screen as well as outer shell from scratches, scraps, smudges and other losses that could occur. Protective skins are easily applied and eradicated so you can change the look of the skin anytime with out any sort of sticky goo or residue left behind and they can equally easily be put back on.

A protective skin helps prolong the life of a precious gadget as well as adds the sense of style. They keep the screen looking new while not scratches or scraps that can impair screen visibility and the sweet look of a new gadget. Most appropriate skins come with military grade protection which is great should the person you are getting it for is the outdoorsy type. Many other protective skins are made from the same materials that are used on innovative cars. Ever seen a car carrier go by with motor vehicles that have that funny looking film on the hood that is certainly there to prevent scratches during transport.

Another gift idea which will help protect their precious gadget or other device is usually a hard or soft case. Most hard and very soft cases that are out will help protect it from lowers, shocks or impacts, as well as adding a personalized facet to their gadget. Though these cases are a little bit more ungainly than a protective skin they will serve the same purpose. Typically the plus to buying a soft or hard case is most currently have clips so you can carry them on belts or banks where a protective skins is a thin layer that gloves tightly around the devise or covers the screen.

Becoming something for the gadget lover in your life doesn’t have to be highly-priced. There are plenty of options out there if you want to get them a cool accessory with regards to favorite device. Prices and quality of protective themes and cases do vary from place to place.